Usb Charge Port; Manual Wwvb Radio-Controlled Time Search; Low Battery Icon - La Crosse Technology 616-146v2 Quick Setup Manual

Rotate Projection:

Press the PROJECTION button to rotate the projection image 90
degrees.

Press the PROJECTION button again to rotate another 90
degrees.
Change Projection Modes: Hold, then release the PROJECTION
button to switch projection modes. Watch the projection image to view
the changes.

Time and Outdoor Temperature: alternate every 5 seconds
(default)

Time only

Outdoor Temperature only
Charge a smart phone, camera or other devices when the forecast
station is plugged into a power outlet with the included 5V AC
adapter.
Note: This is a power-output charging port. It does not supply power
to the projection clock.

Connect your external device's USB charging cable (not included)
to the USB charging port.

Charging times will vary.

USB Power Output: 1A maximum current. Charge 1A devices or
devices that are self-regulating.

MANUAL WWVB RADIO-CONTROLLED TIME SEARCH


Press the -/TIME button to start or stop a manual signal search.
WWVB Icon will flash
For information about WWVB visit:
www.nist.gov/pml/div688/grp40/wwvb.cfm

If the icon is displayed in Outdoor Temperature section,
replace batteries in the outdoor sensor.

If the icon is displayed in Indoor Temperature section,
replace batteries in the projection clock.
Model: 616-146v2

USB CHARGE PORT

LOW BATTERY ICON

www.lacrossetechnology.com/support
WWVB
Icon
Low
Battery
Icon
Page | 4