Sign in today to find solutions:

Forgot your password?

Don't have an account? Sign up

La Crosse Technology WS-8157 Instruction Manual

Atomic clock with outdoor temperature and weather forecast.

 
AT
OMIC CLOCK WITH OUTDOOR WIRELESS TEMPERA
AND WEATHER FORECAST
Instruction Manual
FEATURES:
ATOMIC CLOCK:
LCD1
display
LCD2
display
WWVB Radio controlled time with manual time setting
12/24 hour time display
Time display: hour, minute, second
Alarm setting with snooze function
Calendar display
Weekday display (4 languages to choose from: English, French, Spanish and German)
Time zone setting
Daylight savings time ON/OFF option (DST)
ºC or ºF temperature display selectable
Indoor temperature display
Outdoor temperature display via 433MHz transmission
Wall mount or freestanding
Weather forecast for next 12 to 20 hours based on changing air pressure
WS-8157
Hanging holes
Function keys
Battery cover
Foldable stand
OUTDOOR TEMPERATURE TRANSMITTER:
TURE
• Remote transmission of outdoor temperature to the atomic clock by 433 MHz signals
• Wall mounting case
TO INSTALL AND REPLACE BATTERIES IN THE ATOMIC CLOCK
The atomic clock uses 2 x AA, 1.5V batteries. To install and replace the batteries, please follow the
steps below:
1.
Insert finger or other solid object in the space at the bottom center of the battery compartment
and lift up to remove the cover.
2.
Insert batteries observing the correct polarity (see marking inside battery compartment).
3.
Replace compartment cover.
DO NOT SET THE CLOCK.
TO INSTALL AND REPLACE BATTERIES IN THE TEMPERATURE TRANSMITTER
The transmitter uses 2 x AA,1.5V batteries. To install and replace the batteries, please follow the
steps below:
1.
Remove the cover.
2.
Insert the batteries, observing the correct polarity (see marking inside battery compartment).
3.
Replace the battery cover on the unit.
Alkaline batteries are recommended for use in both units. Avoid using rechargable batteries.
Holder

Summary of Contents

  • Page 1

    OUTDOOR TEMPERATURE TRANSMITTER: WS-8157 OMIC CLOCK WITH OUTDOOR WIRELESS TEMPERA TURE AND WEATHER FORECAST Instruction Manual Holder FEATURES: ATOMIC CLOCK: Hanging holes • Remote transmission of outdoor temperature to the atomic clock by 433 MHz signals • Wall mounting case...

  • Page 2

    In the event of changing batteries of the unit ensure that the batteries do not spring free from the solely upon the change of air pressure over time. The WS-8157 averages past air-pressure readings solely upon the change of air pressure over time. The WS-8157 averages past air-pressure readings contacts.

  • Page 3

    MANUAL SETTINGS Note: Weather Icons If the atomic clock has already successfully received the WWVB time signal and displays the correct time and date, then the Manual settings can be skipped. There are 3 possible weather icons that will be displayed in the LCD 2: After completion of the above described procedures in “Setting up”...

  • Page 4

    • -8 PST (Pacific time), attempts the WWVB tower icon will flash. If reception has been unsuccessful, then the WWVB tower • -9 ALA (Alaska time), icon will not appear but reception will still be attempted the following hour. • -10 HAW (Hawaii time). WWVB time reception takes place from 12:00 am through 6:00 am each day (attempts WWVB •...

  • Page 5

    OUTDOOR TEMPERATURE TRANSMITTER: °C OR °F TEMPERATURE SETTING The temperature is measured and transmitted to the atomic clock every 1 minute. The atomic clock The characters “°C” or “°F” will start flashing on LCD1 (Default setting °F). By use of the + key will update the temperature display every 5 minutes.

  • Page 6

    Press the + key. The display should now show the month&date/weekday/seconds/outdoor In case the atomic clock is not able to detect the WWVB-signal (disturbances, transmitting distance, temperature. etc.), the time can be manually set (please refer to notes on Manual time setting) Press the + key a second time and the display will now show the month&date/weekday/indoor temperature/seconds.

  • Page 7

    WALL MOUNTING Remove the protective strip from the other side of the tape. Position the outdoor temperature 1) Using a straightedge, horizontally space at 2-3/4 of an inch (70 mm) three transmitter in the desired location, ensuring that the atomic clock can receive the signal. screw positions on a wall.

  • Page 8

    CARE AND MAINTENANCE: LIABILITY DISCLAIMER: • Avoid placing the units in areas prone to vibration and shock as these may cause damage. • The manufacturer and supplier cannot accept any responsibility for any incorrect readings and • Avoid areas where the units can be exposed to sudden changes in temperature, i.e. direct any consequences that occur should an inaccurate reading take place.

  • Page 9

    La Crosse Technology provides a 1-year warranty on this atomic clock. Contact La Crosse Technology immediately upon discovery of any defects covered by this warranty. Before sending the atomic clock in for repairs, contact La Crosse Technology. The atomic clock will be repaired or replaced with the same or similar model.

  • Page 10

    WS-8157 ATOMIC CLOCK WITH OUTDOOR TEMPERATURE AND WEATHER FORECAST Instruction Manual...

Comments to this Manuals

Symbols: 0

Latest comments:

×

Select the desired size and copy embed code

Copy your embed code and put on your site: