3. If there is no WWVB reception, manually set the time and date (instructions in the Program Mode). 4. Program the settings. 5. Mount the WS-9412U in a suitable location, where WWVB signals can be received. DETAILED SET-UP GUIDE "8" will appear in the hour position and the seconds will appear in the minute display.
I. FUNCTION BUTTONS 1. Hold down the "SET" button for 2 seconds (the se- There are 2 function buttons located on the front of the lected time zone will flash), press the "SET" button Atomic Clock. The function buttons are labeled: SET once more until "On"...
Opening the casings invalidates the warranty. Do the atomic clock. The hinge is towards the center of the not try to repair the unit. Contact La Crosse Technol- atomic clock, and the end (with no hinge) needs to be ogy for Repairs.
La Crosse Technology, Ltd or La Crosse Technology, Ltd’s authorized service center. La Crosse Technology, Ltd will repair or replace this product, at our option and at no charge as stipulated herein, with new or reconditioned parts or products if found to be defective during the limited warranty period specified above.
Page 6
LA CROSSE TECHNOLOGY, LTD WILL NOT ASSUME LIABILITY FOR INCIDENTAL, CONSEQUENTIAL, PUNITIVE, OR OTHER SIMILAR DAMAGES ASSOCIATED WITH THE OPERATION OR MALFUNCTION OF THIS PRODUCT. THIS PRODUCT IS NOT TO BE USED FOR MEDICAL PURPOSES OR FOR PUBLIC INFORMATION.
Page 7
This device must accept any interference received, including interference that may cause undesired operation. La Crosse Technology Made in China All rights reserved. This handbook must not be reproduced in any form, even in excerpts, or duplicated or processed using electronic, mechanical or chemical procedures without written permission of the publisher.