Glass Cleaning - Travis Industries Space Saver IPI Fireplace 564 Owner's Manual

24

Glass Cleaning

The glass may be cleaned with a non-
abrasive cleaner. To clean the inside of the
glass, simply remove the glass
on a non-scratching surface, and clean the inside
surface.
If the outside surface of the glass frame
requires cleaning, follow the directions
below to remove the outer glass frame and
screen.
WARNING: do not operate the fireplace without the glass frame in place.
Six sets of tabs hold the glass (and glass gasket) in place. Four of these tabs are at the corners,
two are at the top and bottom of the glass frame.
REMOVAL INSTRUCTIONS: carefully bend the tabs out with needle-nose pliers (there are tabs
on the inner and outer frame - the center tabs only have tabs on the inner frame). Do not pry
these tabs, this may cause the glass to crack.
REPLACEMENT INSTRUCTIONS: carefully bend the tabs inward, making sure the tabs contact
the gasket, not the glass. Bend the tab inwards 30°- do not over-bend the tabs.
With the outer glass
frame and screen
removed, the outer
surface of the glass
may be cleaned.
© Travis Industries
Maintenance
frame, place it
Gasket
Tabs
Outer Frame
4081205
Inner Frame
Inner glass frame
The optional screen is
sandwiched between
the inner and outer
glass frame.
Outer glass frame
100-01211_000