16
Glass Cleaning
The glass may be cleaned with a non-abrasive cleaner. To clean the inside of the glass, simply
remove the glass
frame, place it on a non-scratching surface, and clean the inside surface.
WARNING: do not operate the fireplace without the glass assembly in place.
Battery Installation
HINT: When the flame height adjustment no longer operates, this is an indication that the battery
box batteries are low and require replacement.
See the directions below for battery replacement.
The Wall Switch requires two (2) CR2032 3V
batteries (included).
NOTE: The positive side (+) faces outwards.
CR2032
© Travis Industries
Maintenance
Battery Pack
(make sure this switch is
set to "DC Motor Drive")
Wireless Wall Switch
CR2032
The battery pack requires four
(4) AA batteries (not included)
The Remote requires two (2) AAA batteries (included)
Cover Plate
(snaps into place)
Back of Remote
4080204
100-01198_000