SATO MB200i Programming Reference Manual page 21

COMMAND QUICK REFERENCE
INSTRUCTION
FWaabbVcccHdddd
Gabbbccc(data)
GCaaa
GIabbbcccdddee...e
GMaaaaa
GRccc
GTaaa,bbbbb, nn. . . n
Haaaa
IDaa
"i" Programming Reference
Unit 3: Code Quick Reference
Box. Prints a box. For values aa, bbbb, cc, and dddd, see instructions for horizontal and
vertical lines. Units of measurement are dots.
aa = Width of horizontal side
bb = Width of vertical side
cccc = Length of vertical side
dddd = Length of horizontal side
Custom Graphics. Allows the creation and printing of graphic images using a dot-
addressable matrix.
a = Specifies format of data stream to follow
B: Binary
H: Hexadecimal
bbb = Number of horizontal 8 x 8 blocks
ccc = Number of vertical 8 x 8 blocks
data = Data to describe the graphic image
BMP File, Recall. Recalls BMP graphic files stored in Expanded Memory.
Graphic, Store. Stores a graphic image in the memory card to be called later for printing on
a label.
a = Specifies format of data stream to follow
B: Binary
H: Hexadecimal
bbb = Number of horizontal 8 x 8 blocks
ccc = Number of vertical 8 x 8 blocks
ddd = Graphics storage number (001 to 999)
ee...e = Data to describe the graphic image
BMP File. Prints BMP file to the internal graphics image memory.
aaaaa = Quantity of bytes to download (max DOS file size is 32K).
Graphic, Recall. Recalls for printing the graphic image stored by the GI command.
ccc = Storage number (001 to 999)
BMP File, Store. Stores BMP files in Expanded Memory.
aaa = Storage area number (001 to 999)
bbbbb = Size of BMP file in bytes
nn....n = Data
Horizontal Position. Specifies a fieldís horizontal location across the width of the label from
the current base reference point. The units of measurement are dots.
Job ID Store. Stores the Job ID number.
aa = Job ID number assigned (01 to 99)
DESCRIPTION
3-5
PN: 9001158B