Communicating With The Printer; Installing A Plug And Play Printer Driver (For Usb Only) - Argox OS-214plus User Manual

Ethernet Status/Activity Indicators
LED Status
Both Off No Ethernet link detected
Speed LED
Green LED
On: 100 Mbps link Off: l0 Mbps link
Link/Activity LED
Amber LED
On: link up Off: link down Flash: activity
Green LED
Amber LED
Description
35

Communicating with the Printer

The bundled printer driver can be applied to all applications under
Windows 2003/ XP/ Vista/ Windows 7, supporting 32-bit/ 64-bit
operation systems. With this driver you can operate any popular
Windows software applications including Argox Bartender UL
label editing software or MS Word, etc., to print to this printer.
The following installation steps are based on OS-2140 as an
example. The screens included for these steps are taken from
Windows XP; steps in other versions of operation systems are
similar.
Installing a Plug and Play printer driver (for
USB only)
Note:
We strongly recommend that you use the Seagull Driver Wizard
instead of the Microsoft Windows Add Printer Wizard when
installing and updating your Drivers by Seagull.
(Even though the "Add Printer Wizard" is from Microsoft, it too
easily performs a number of tasks incorrectly when updating
existing drivers. It also badly handles the situation where a printer
driver is already in use by a Windows application.)
1. Turn off the printer. Plug the power cable into the power
socket on the wall, and then connect the other end of the
cable to printer's power socket. Connect the USB cable to the
36