4. Install one ribbon roll and rotate it until the notches align and lock
into the left side of Ribbon Supply hub, and then into the right.
Ribbon Supply Holder
Note:
The Ribbon Supply Holder accepts the coated side of ribbon to
be wound ink-side IN or wound ink-side OUT.
Compact Printer Series - User's Manual
29
5. Install the other ribbon roll and rotate it until the notches align and
lock into the left side of Ribbon Pick-up hub, and then the right.
Ribbon
Pick-up
Holder
Note:
The Ribbon Pick-up Holder accepts the coated side of ribbon to
be wound ink-side OUT only.
Compact Printer Series - User's Manual
30