Loading Media; Preparing Media; Placing Media Roll - Argox CP-2140 User Manual

Loading Media

Preparing Media

The inside wound or outside wound media rolls can be loaded into
the printer in the same way. In case media roll may become dirty or
dusty during shipment, handling, or storage, firstly remove the outside
length of media, which helps to avoid dragging adhesive or dirty
media between the print head and platen roller. When loading media,
it must be placed onto the media hangers.

Placing Media Roll

1. Open Top Cover of the printer.
Top Cover
Compact Printer Series - User's Manual
15
2. Put the Media Hanger through media supply roll, and then
centrally align with the two Media Shields to closely lean against
the media supply roll.
Media Hanger
3. Locate the media supply roll into the Media Compartment of
printer.
Compact Printer Series - User's Manual
Media Shield
Media Compartment
16