Initializing An Sd Card; About The Software Version - Zoom Handy Recorder H4 Operation Manual

Miscellaneous Settings
HINT
• The above display is for information only. No
changes can be made at this display.
• The indication of remaining recording time is
only an approximation.
4.
To return to the stereo mode or
4-track mode top screen, repeatedly
press the center of the [MENU] key.

Initializing an SD card

To initialize (format) an SD card inserted in the
H4, proceed as follows. To use an SD card that
has previously been initialized in a computer or
digital camera or similar, be sure to format in the
H4 first.
NOTE
The initialization process will erase all information
stored on the SD card, and the information cannot
be retrieved. Perform this operation with care.
1.
Verify that the recorder is stopped.
Then press the center of the [MENU]
key at the stereo mode or 4-track
mode top screen.
The main menu for miscellaneous settings of the
H4 appears.
2.
Move the jog dial up/down to bring
the cursor to "CARD", and then press
the jog dial.
The CARD menu screen for various SD card
operations appears.
84
3.
Move the jog dial up/down to bring
the cursor to "FORMAT", and then
press the jog dial.
The display changes as follows.
FORMAT button
4.
To carry out the initialization
process, move the jog dial up/down
to bring the cursor to the FORMAT
button, and then press the jog dial.
The initialization process starts. When it is
complete, the stereo mode top screen appears
automatically.
If you select the CANCEL button instead of the
OK button, the initialization process is canceled,
and the display returns to the condition of step 2.

About the software version

Using the SD card and a computer with an
Internet connection, you can update the system
software of the H4 to the latest version, by
performing the procedure described below.
1.
Download the latest system software
from the web site of ZOOM
Corporation.
CANCEL button
ZOOM H4