Zoom Handy Recorder H4 Operation Manual page 44

4-Track Mode
3.
Locate a point slightly before the
intended punch-in point, and press
the top (@) of the [MENU] key.
4.
When you come to the punch-in
point, press the [REC] key.
The [REC] key lights up, and track recording
begins from that location (punch-in).
5.
When you come to the intended
punch-out point, press the [REC] key
once more.
The [REC] key goes out, and the H4 switches
from recording to playback (punch-out).
6.
Press the top (@) of the [MENU] key
to stop the recorder.
7.
To check the results, use the locate
function to move to a point before
the punch-in point, and press the top
@
( ) of the [MENU] key.
◆ Auto punch-in/out
To automatically re-record only a part of an
audio track by specifying the punch-in/out points
beforehand, proceed as follows.
1.
At the top screen, press one of the
TRACK [1] – [4] keys to select the
track you want to re-record.
The display shows the number of the selected
track.
44
A-PUNCH
Input
signal level
2.
The input signal can now be monitored. The
number of the track selected as recording target
is shown in reverse.
3.
4.
The A-PUNCH button flashes, and the point is
set as the punch-in point where auto punch-in/out
will begin.
NOTE
In Always New mode, the A-PUNCH button is
grayed out and cannot be selected.
5.
The A-PUNCH button changes from flashing to
reverse, and the point is set as the punch-out
point where auto punch-in/out will end. When
auto punch-in/out is enabled, the TRACK key(s)
will flash while the recorder is before the punch-
in point and after the punch-out point.
NOTE
• To redo the punch-in/out point setting, bring
the cursor to the A-PUNCH button and press
the jog dial to return the button indication to the
original condition. Then repeat steps 3 – 5.
button
Press the same TRACK [1] – [4] keys
that you pressed in step 1 repeatedly,
so that the key is lit in red.
Locate the intended punch-in point.
Move the jog dial up/down to bring
the cursor to the A-PUNCH button.
Then press the jog dial.
Locate the intended punch-out point
and bring the cursor to the A-PUNCH
button. Then press the jog dial.
ZOOM H4