Salus RT500RF Manual:89
AFTER INSTALLATION
The following table shows the settings of the RT500RF programmable
thermostat after Power on, or after RESET is pressed:
Function
Operation Mode
Room Temperature
°C indicator
Clock
AM/PM indicator
Day of Week indicator
Program
Set Point Temperature
Program Number indicator
SET indicator
PROG indicator
Frost Protection indicator
Heat indicator
Low-Battery Warning indicator
Output Relay
After Power on, the thermostat will operate in Normal mode (Normal mode is
when the thermostat is displaying the room temperature):
•
The set point temperature is reset to the default setting
•
The room temperature display is updated within 5 seconds
•
The control process starts
•
The programme number is updated to indicate the running program
If the Reset Button is pressed, the RT500RF will behave in the same way as
described above, except that any previously saved user settings stored in the
internal memory will be deleted and overwritten with the default settings, and
all programmable thermostat control settings will be returned to default values.
14
9/7/10
Status After Reset or Power On
Normal mode
22.0 °C, updated within 5 seconds
On
12:00
AM
M
Default factory setting
Default factory setting
1
Off
Off
Off
Off
Off, updated within 5 seconds
Off
RT500RF INSTRUCTION MANUAL
10:10
Page 14