Canceling The Center Sound (Center Cancel) - Boss MICRO BR Owner's Manual

Digital recorder
Hide thumbs Also See for MICRO BR:
Table of Contents

Advertisement

Using the MP3 player
Canceling the center sound
(Center Cancel)
Remove the central sound of the playback (e.g.,
vocals or guitar solos). This is helpful if you want
to practice playing along with the backing
instruments.
5
2
3
1 8
4
1
Press [MP3/TRAINER] to switch to
MP3 mode.
The MP3 player screen will appear.
fig.Disp-mp3-mode.eps
2
Use CURSOR [
cursor to the file number, and use
VALUE [-][+] to select the file number
that you want to play.
3
Use CURSOR [
display indicate "CENTER CANCEL."
fig.Disp-mp3-mode.eps
4
Press [TR1] to turn on the Center
Cancel function.
Each time you press [TR1], the setting will
alternate between "ON" and "OFF".
38
2 7
5
6
][
] to move the
][
] to make the
5
Press
.
Sounds that are heard from the center (such
as vocals and guitar solos) will be
eliminated.
Slowly turn the VOLUME dial to adjust the
volume.
The guitar etc. are connected, and it is
possible to play while listening the MP3/
WAV file.
6
If you want to eliminate a sound that
is located in a position other than the
center, Press [TR4] (EDT).
The CenterAdjst screen will appear.
fig.Disp-CENTER-ADJ.eps
7
Use VALUE [-][+] to adjust.
• Depending on the recorded audio, it may
not be possible to completely eliminate the
center sound.
• If you want to eliminate a sound that is
located in a position other than the center,
you can adjust the CenterAdjst parameter.
• If you want to boost the bass sound (low
frequency range), adjust the Low Boost
parameter (p. 98).
• The playback sound will be monaural when
the Center Cancel function is on.
• Use the INPUT LEVEL dial to adjust the
volume balance relative to the instrument
connected to the input jack.
8
When you finished MP3 mode, press
[MP3/TRAINER] again.

Advertisement

Table of Contents
loading

Table of Contents