Using Plug-In Powered Microphone - Boss MICRO BR Owner's Manual

Section 7. Other Convenient Functions
6.
Press [TR4] (NEXT).
The Import to setting screen appears.
fig.06-020
7.
Use CURSOR [
to specify the import-destination track.
Choose the track on which the audio data
will be recorded.
Range: TR1-V1–V8, TR2-V1–V8,...,
TR34V1–V8
If you select TR1–TR4, the data will be
imported in monaural, and if you select
TR12 or TR34, the data will be imported
in stereo.
For example, if you select TR12, the left
channel of the audio file is imported
into TR1, and the right channel of the
audio file is imported into TR2.
If you want to listen to these tracks in
stereo after it has been imported, set the
pan for TR1 to "L50," and set the pan
for TR2 to "R50." (p. 46)
8.
Press [TR1] (TIM) or [TR2] (MEA).
Specify the location within the specified
track into which the data will be imported.
Press [TR1] (TIM) if you want to specify the
location by time, or press [TR2] (MEA) if you
want to specify the location by measure.
9.
Use CURSOR [
to specify the time or measure at which
you want to import the data.
10. Press [TR4] (EXE).
The display will ask "Import OK?"
11. If you want to convert, press [TR4] (YES),
to cancel, press [EXIT].
When [TR4] (YES) is pressed, the audio data
will convert to track data.
116
][ ] and VALUE [-] [+]
][ ] and VALUE [-] [+]
Using plug-in powered
microphone
You can connect a plug-in powered condenser
mic to the LINE IN/MIC jack.
Perform the procedure given below to use the
plug-in powered microphone.
1.
Connect the plug-in powered microphone
to the LINE IN/MIC jack.
2.
Turn the power on as described in
"Turning the power on" (p. 25).
3.
Press [INPUT] and then press [TR4] (EXT).
4.
Press [UTILITY].
5.
Use CURSOR [
PlugInPower screen.
fig.06-020
6.
Use VALUE [+] to turn value ON.
If you want to turn value OFF, press [-].
7.
Press [UTILITY] (or [EXIT]) to return to the
Play screen.
• A voltage of approximately 2.5 V can be
supplied from the LINE IN/MIC jack.
Unlike phantom power, this cannot supply
48 V.
• If PlugInPower is turned ON, you must
connect only a condenser mic that is
compatible with plug-in power. Connecting
any other device (dynamic microphone etc.)
may damage that device.
The PlugInPower parameter is stored
individually for each song.
][ ] to access the