Boss MICRO BR Owner's Manual page 70

Section 3. Using effects
4BAND EQ (EQ)
A 4-band equalizer.
On/Off
This parameter turns the equalizer effect on/off.
Low Gain
This parameter sets the gain (amount of boost or
cut) for the bass equalizer.
Lo-M Gain
This parameter sets the gain (amount of boost or
cut) for the low-midrange equalizer.
Lo-M F
This parameter sets the central frequency for the
low-midrange equalizer.
Lo-M Q
This parameter sets the range of change in gain
for the frequency set by "Lo-M F." A larger value
results in a narrower range of change.
Hi-M Gain
This parameter sets the gain (amount of boost or
cut) for the high-midrange equalizer.
Hi-M F
This parameter sets the central frequency for the
high-midrange equalizer.
Hi-M Q
This parameter sets the range of change in gain
for the frequency set by "Hi-M F." A larger value
results in a narrower range of change.
High Gain
This parameter sets the gain (amount of boost or
cut) for the treble equalizer.
Level
This parameter adjusts the volume after the
equalizer stage.
70
OFF, ON
-20 – +20 (dB)
-20 – +20 (dB)
100 – 10.0k (Hz)
0.5 – 16
-20 – +20 (dB)
100 – 10.0k (Hz)
0.5 – 16
-20 – +20 (dB)
-20 – +20 (dB)
CHORUS (FX)
A sound with a subtly shifted pitch is added to
the direct sound, making the final output sound
thicker and broader.
* This effect can be used when the FX "Type" parameter
is set to "CHORUS."
On/Off
This parameter turns the chorus effect on/off.
Rate
Adjusts the rate of the Chorus effect.
Depth
Adjusts the depth of the Chorus effect.
E.Level
Adjusts the volume of the effect sound.
COMPRESSOR (FX)
This corrects differences in input to create a
steadier, more even volume balance. This is used
to extend the sustain of input sounds and,
conversely, to shorten sustain and emphasize the
attack portion of sounds.
Another use of compression is as a "limiter,"
which prevents distortion by suppressing only
volume peaks.
* This effect can be used when the COSM GTR AMP's
FX "Type" parameter is set to "COMPRESSOR."
On/Off
This parameter turns the compressor effect on/
off.
Sustain
This adjusts the depth of the effect. Higher
settings values result in longer sustain times. Set
this to a lower value when using compression for
the limiter effect.
Attack
Adjusts the strength of the attack. Larger values
will result in a sharper attack, creating a more
clearly defined sound.
Level
Adjusts the volume.
OFF, ON
0 – 100
0 – 100
0 – 100
OFF, ON
0 – 100
0 – 100
0 – 100