Bank Settings
Basic Procedure for Bank Settings
1
Select the bank for which you want to make settings.
2
Press the [SETUP] (EXIT) button.
3
Press a button to select the category of settings that you want to make.
Button
[P. SHIFT] (RHYTHM) button
[LO-FI] (LOOP) button
[RING MOD] (CTL) button
[DELAY] (FX) button
4
Press the [VALUE] knob to select a parameter, and turn the [VALUE] knob to edit the value.
5
Press the [SETUP] (EXIT) button to return to the Play screen.
RHYTHM
Indication
Value
Adjusting the Rhythm Volume (Rhythm Level)
LV
0–100 (default: 50)
Selecting the Rhythm Sound (Rhythm Pattern)
Selects the rhythm pattern, such as rock drums or Latin percussion. The rhythm pattern is selected independently for each phrase memory.
PTN
* You should select the time signature before you select the rhythm pattern. If you change the time signature, the rhythm pattern is set to "P03. "
Reference
Refer to "Rhythm Pattern List" (p. 12)
Selecting the Time Signature for the Rhythm Sound (Beat)
Selects the time signature of the rhythm. The time signature is selected independently for each phrase memory.
BET
* The time signature cannot be changed once you've recorded a track. You must specify this before recording.
* If you change the time signature, the rhythm pattern is set to "P03. "
Reference
Refer to "Rhythm Pattern List" (p. 12)
Outputting the Rhythm Only to Headphones (Rhythm Line Out)
LIN
This lets you output the rhythm only to headphones. If you want to use the rhythm sound as a click, you can turn this "OFF" so that it will not be output
from the LINE OUTPUT jacks.
OFF
ON (default)
Playing a Count-In When Recording (Recording Count-In)
REC
You can have recording start after a count-in sound is played.
* A count-in won't be sounded when a track or rhythm is being played back.
OFF (default)
1M
Playing a Count-In for Playback (Playback Count-In)
PLY
You can have playback start after a count-in sound is played.
OFF (default)
1M
Specifying How the Rhythm Sound Will Stop (Rhythm Stop)
You can specify how the rhythm sound will stop.
STP
OFF
LPR (default)
REC
Explanation
Make rhythm-related settings.
Make looper-related settings such as recording and playback method.
Make controller-related settings such as for external pedals.
Make effect settings.
Explanation
Adjusts the volume of the rhythm sound.
The audio of the rhythm sound is output only from the PHONES jack.
The audio of the rhythm sound is output from the LINE OUTPUT jacks and the PHONES jack.
No count-in is played.
Recording starts after a one-measure count-in is played.
No count-in is played.
Playback starts after a one-measure count-in is played.
The rhythm sound plays regardless of the looper function. The rhythm sound does not stop until you press the
RHYTHM [START/STOP] button.
When you press the [9] button to stop the looper function, the rhythm sound also stops.
You can stop the rhythm sound when ending the first recording. The rhythm sound stops when you press the
[ p / t ] button to loop (transitioning to overdub or playback)
5