I Group And Priority Scans - Icom IC-41S Instruction Manual

5
SCAN OPERATION

I Group and priority scans

Group and priority scans repeatedly watch a priority channel
while scanning specified channels. This is useful when wait-
ing for a call on the priority channel or several specified chan-
nels.
Group and priority scans behave differently when transmit-
ting. Group scan can transmit on a priority channel or busy
channel, and priority scan can only transmit on a priority
channel.
q Push
(Scan Mode)
priority scan. (p. 18)
• " " appears when the group scan is selected, and "
pears when the priority scan is selected.
Group scan is selected.
w Set the priority channel if desired when the priority scan
type is selected in step q. (p. 13)
• When the priority channel is not set, scan start channel is moni-
tored during the priority scan.
20
several times to select the group or
Appears
Priority scan is selected.
Appears
e Push
(Scan)
Group scan starts.
Priority scan starts.
" ap-
r When receiving a signal, the scan pauses and resumes
Appears
according to the selected scan resume condition. (p. 19)
t Push
(Scan)
to start the scan.
Blinks
Scan start channel
Blinks
Priority channel
to cancel the scan.