Vfo Description - Icom IC-910H Instruction Manual

n VFO description
The IC-910H has two VFOs for both bands, special-
ly suited for instant selection of 2 frequencies or split
frequency operation. The VFOs are called VFO A and
VFO B. You can use the desired VFO to call up a fre-
quency and operating mode for your operation.
VFO is an abbreviation of Variable Frequency Oscilla-
tor, and traditionally refers to an oscillator.
D Selecting the VFO A/B
➥ Push [A/B 3] to switch between the VFO A and
VFO B.
D VFO equalization
➥ Push [A=B 2] for 1 sec. to equalize the undisplayed
VFO condition to the displayed VFO.
• 3 beeps sound when the VFO equalization is complet-
ed.
CONVENIENT
Use two VFOs as a quick memory
When you find a new station, but you wish to contin-
ue searching, the two VFO system can be used for
quick memory storage.
q Push [A=B 2] for 1 sec. to store the displayed fre-
quency into the undisplayed VFO.
w Continue searching for stations.
e Push [A/B 3] to retrieve the stored frequency.
r To continue searching for stations, push [A/B 3]
again.
BASIC OPERATION
VFO selection
FM
FM
displayed VFO
FM
undisplayed VFO
FM
Equalizes the undisplayed VFO condition
to the displayed VFO.
4
VFO A
VFO B
VFO A
VFO B
21