Icom IC-E208 Instruction Manual page 77

D D Data transmission speed
Selects the data transmission speed for packet operation
from 1200 bps and 9600 bps.
D D Squelch delay
Selects squelch delay from short and long to prevent re-
peated opening and closing of the squelch during reception
of the same signal.
• S : Short squelch delay.
• L : Long squelch delay.
D D Microphone sensitivity
Selects the microphone sensitivity from high (H) and low (L)
to suits your preference.
OTHER FUNCTIONS
D D Squelch attenuator
Turns the squelch attenuator function ON and OFF.
• ON : The squelch attenuator activates when [SQL]
control is set between 12 o'clock and fully
clockwise position.
• OF : The squelch attenuator does not function.
D D Active band
Selects the frequency selecting condition via [DIAL] or [Y]/[Z]
on the microphone from all (AL) and single (SI).
• All (AL) : The operating frequency can be selected
continuously.
• Single (SI) : The operating frequency can be selected
within the current band. Pushing [BAND] for
1 sec. then tuning dial rotation is necessary
for frequency band selection.
11
11
62