Table of Contents
Advertisement
D Programming a DTMF code— via microphone
z Push [FUNC] then [
DTMF
DTMF encoder ON.
• "d" appears in place of 100 MHz digit.
x Push [
B(D-OFF)] to enter the DTMF memory
SET
programming condition.
c Push [Y] or [Z] to select the desired DTMF
memory channel.
v Push the desired digit keys.
• When the first digit is input, previous memory con-
tents are cleared automatically.
• "E" stands for "M M " and "F" stands for "# ."
• Push [Y]/[Z] and repeat this step if you make a mistake.
• The S/RF indicator shows the digit group. The indi-
cation increases every 6 digits.
[EXAMPLE]: Programming "5428AB453" into DTMF memory channel "D4."
Push
Push
6(DTMF)] to turn the
LOW
then
.
Push
DTMF MEMORY ENCODER
b Push [VFO/LOCK] to exit the programming condition.
• The [
A(MW)] key cannot be used to exit. If pushed, code "A"
CLR
is input. Reprogram in such a case.
Push
Push
9
9
48
Hide quick links:
Advertisement
Table of Contents
