Recovering The Image Density (Quality Start) - Ricoh VT2250 Operator's Manual

Recovering The Image Density (Quality Start)

If the machine is not used for a long period of time, the image density might
decrease because the ink on the drum might dry. Printing quality can be
regained by making a few prints. The Quality Start function recovers the
image density quality by making a print with slow printing speed (20
sheets/minute). It prevents you from making extra prints.
You can select how many times Quality Start mode is carried out for each
master making using Service Program mode.
When you set the Quality Start function, the bold letters or solid images may be
light.
If you use the Quality Start function before 6 hours have passed after the last
operation, the image density may not be recovered earlier. However, it is con -
venient to use this function when you change drum unit and make prints before
6 hours have passed after the last operation.
Set your originals on the expo-
1
sure glass or in the optional
document feeder.
Press the Quality Start key.
2
Make sure that Master Making
3
indicator is lit and then press the
Start key.
See page 105.
OPERATION
80