Remote Control Friction Adjustment; Other Checks; Fuel Hose; Stern Bracket/Clamp Screws - Honda Marine BF25A Owner's Manual

5. PRE-OPERATION CHECKS
Remote Control Friction Adjustment
SE
FRICTION
Operate the remote control lever into
forward and reverse gears and check
for the amount of drag felt.
Adjust the remote control friction
adjuster so that a slight amount of drag
is felt. The remote control lever should
move smoothly and freely,
Other Checks
2
.- _ .e.--
m 1.
1
-
4
Check the following items:
1. The fuel hose for kinking, collaps-
ing or loose connections.
2. The stern bracket for damage. Make
sure the clamp screws and mounting
bolts (if equipped) are tight.
3. The tool kit contents. Compare your
tool kit contents against the tool kit
illustration above. Replace any
missing items.
4. The anodC for damage, looseness or
excessive corrosion.
The anode helps to protect the outboard
motor from corrosion any time it is
exposed directly to the water.
. Tool Kit
-a
PHILLIPS
SCREWDRIVER
SCRRWDRIVER
C=-
=a
HANDLE
TOOL BAG
OIL CHECK
SCREWDRIVER
LE2rzzl
I* I I9 Dim WRRNCH
Replace the anode when it has been
visibly reduced in size.
-1 Painting or coating the
anode will lead to rust and corrosion
damage to the outboard motor.
The following materials should be
kept with the boat:
1. Owner's Manual.
2. Tool Kit.
3; Spare engine oil, spark piugs,
propeller, propeller cotter pins and
nut.
4. Required information regarding
boating laws and regulations.
32