Advertisement
SPECIFICATIONS
DESIGNATION TYPE
OUTPUT POWER
MONO BRIDGE
SINGLE CHANNEL DRIVEN @ 1 kHz, 1% THD
POWER BANDWIDTH
FREQUENCY RESPONSE
RISE TIME
SLEW RATE
TOTAL HARMONIC
DISTORTION (THD)
HUM AND NOISE
DAMPING FACTOR
INPUT IMPEDANCE
CHANNEL SEPARATION
SENSITIVITY
STATUS INDICATORS
COOLING
GAIN CONTROLS
MODE SWITCHING
POWER REQUIREMENTS
DIMENSIONS
Weight
Height
Width
Depth
PR 200
Stereo Continuous sine wave output power,
both channels driven +/- 1dB, 20 Hz to 20kHz, THD < 0.03%
150 W into 8 Ω, each channel
300 W into 4 Ω, each channel
300 W into 16 Ω
600 W into 8 Ω
8 Ω 179W
4 Ω 312W
10 Hz to 68 kHz
(3 dB down from rated power at less than 0.1% THD)
+0 -3dB; 5 Hz to 68 kHz (at rated power, 8 Ω)
Less than 5.2 µSec
Greater than 13.5 V/µSec
20 to 20 kHz at rated power, 4 Ω. Less than 0.03%
Below rated output, 4 Ω
20 Hz to 20 kHz broad band 95 dB
IEC A Weight 102 dB
Reference, 8 Ω
5 Hz to 20 kHz Greater than 30
1 kHz Greater than 175
Differential 33 kΩ
Below rated power, single channel operating
1 kHz, Greater than 65 dB
Referenced 1 kHz, +/- 0.25 dB
Stereo Mode +1.8 dBV (1.23V)
Bridged Mode +1.8 dBV
Each channel-Peak LED (red)
Power LED (green)
Two speed fan
Continuously variable attenuator, one per channel
Stereo-Mono Bridge, Stereo-Dual Mono, two push button
switches
1000W
25 lbs.
3.5 in.
19 in.
15 in.
A PRODUCT OF:
FENDER MUSICAL INSTRUMENTS CORP.
CORONA, CA 91720 USA
7
(11.3 kg)
(8.9 cm)
(48.3 cm)
THIS EQUIPMENT CONFORMS TO
(38 cm)
THE FOLLOWING DIRECTIVES :
EMC 89/336/EEC AND LV 73/23/EEC
Advertisement
