Fender '64 Custom Princeton Reverb - Amplifier Manual

Fender '64 Custom Princeton Reverb - Amplifier Manual

Advertisement

Fender '64 Custom Princeton Reverb - Amplifier Manual

'64 CUSTOM PRINCETON® REVERB-AMP

Terrific for any kind of music, Fender's Princeton is simply one of the most versatile and beloved guitar amplifiers of all time. It delivers quintessential Fender tonal response, reverb and tremolo; and it is the perfect size for guitarists who want a moderately powered amp for any stage or studio situation. And in the modern pedalboard era, it is the perfect platform for tone building.

Highly collectable 1960s models bring big money on the vintage gear market. These originals, as well as long-running Fender reissue models, are used every day on every stage and in every venue worldwide. Hand-wired in Corona, Calif., the 12-watt '64 Custom Princeton ReverbAmp joins this prestigious group.
Premium features include:

  • Hand-wired AA764 circuit with tube-driven spring reverb and tremolo
  • Fender Vintage Blue tone capacitors
  • Three 12AX7 and one 12AT7 preamp tubes
  • 5AR4/GZ34 rectifier tube
  • Matched pair of 6V6 power tubes
  • 12 watts output power
  • 10" Jensen® alnico P10-R speaker for warm clean tones and moderate breakup
  • Solid pine cabinet for resonance and lighter weight
  • Extra-heavy textured vinyl covering
  • Lightly aged silver grille cloth
  • Footswitch and amp cover

Register your '64 Custom Princeton Reverb-Amp online at start.fender.com.

CONTROL PANEL

CONTROL PANEL

  1. INPUTS: Connect instruments here. These two inputs provide sweetened vintage frequency response as per the popular "bright cap removal" modification. Input 1 produces full sensitivity; input 2 has lower sensitivity (-6dB) for cleaner response with high-output and pre-amplified instruments.
  2. VOLUME: Controls volume level.
  3. TREBLE AND BASS: Controls respective high-frequency and low-frequency signal levels.
  4. REVERB: Controls reverb effect level. No reverb effect is heard when this control is turned fully counterclockwise. Reverb can also be turned on and off using the included two-button footswitch.
  5. SPEED: Controls rate of the tremolo effect. Tremolo can also be turned on and off using the included two-button footswitch.
  6. INTENSITY: Controls depth of the tremolo effect. No tremolo effect is heard when this control is turned fully counterclockwise.
  7. POWER JEWEL: Illuminates while amplifier is on.

REAR PANEL

REAR PANEL

  1. IEC POWER INLET: Using the included power cord, connect to a grounded outlet in accordance with the INPUT POWER voltage and frequency specified at the power inlet.
  2. FUSE: Provides electrical overcurrent protection.
  3. POWER: Turns the amplifier on and off.
  4. INTERNAL SPEAKER: Jack for internal 8-ohm speaker. If connecting a different speaker to this jack, it should have an impedance of 8 ohms when this is the only jack in use.
  5. EXTERNAL SPEAKER: Jack to allow use of multiple speakers; wired in parallel with INTERNAL SPEAKER jack (K) and affecting total impedance. External speaker jack does not function when INTERNAL SPEAKER jack (K) is disconnected.
  6. FOOTSWITCH: Connect the included two-button footswitch here.
  7. REVERB OUTPUT/INPUT: RCA jacks connecting output/input of reverb pan located on the floor inside the cabinet.

SPECIFICATIONS

TYPE: PR 770

POWER:
Requirements: 100 watts
Output: 12 watts RMS into 8Ω @ 5%THD, 1kHz

INPUT IMPEDANCE: 1 MΩ (input 1) 136 kΩ (input 2)

OUTPUT IMPEDANCE: 8Ω (internal and external speaker jacks combined)

SPEAKER: One 10" Jensen® P10-R (8Ω)

TUBES:
One pair 6V6 (power, PN 0069673300)
Three 12AX7 (preamp, PN 0074287400)
One 12AT7 (preamp, PN 0078799200)
One 5AR4 (rectifier, PN 0041400000)

FUSE:
F2A L 250V (100V-120V models)
F1.25A L 250V (220V-240V models)

ACCESSORIES:
Deluxe fitted cover included
Two-button footswitch included

DIMENSIONS:
Width: 20" (50.8 cm)
Height: 16.4" (41.6 cm)
Depth: 9.4" (23.8 cm)

WEIGHT: 32 lbs. (14.5 kg)

Product specifications subject to change without notice.

For questions and troubleshooting, contact a Fender specialist at:
1-800-856-9801 (U.S. toll free)

1-480-596-7195 (International)

Documents / Resources

References

Download manual

Here you can download full pdf version of manual, it may contain additional safety instructions, warranty information, FCC rules, etc.

Download Fender '64 Custom Princeton Reverb - Amplifier Manual

Advertisement

Need Assistance?

Do you have a question about the '64 Custom Princeton Reverb that isn't answered in the manual? Leave your question here.

Error while submitting your question. Please, reload page and try again.

Thank you! Your question has been received!

Table of Contents