TWO CHANNEL POWER AMPLIFIER SPL-6000 INTRODUCTION Your new Fender SPL-6000 Power Amplifier is designed to provide you with years of trouble-free service for both permanent and portable applica- tions. Utilizing a unique proprietary cross coupled protection system, the SPL-6000 delivers more...
DESCRIPTION OF FEATURES PEAK LIMIT LEFT •CHANNEL A 1. FRONT PANEL A - PEAK LED INDICATOR The red Peak LED Indicator illuminates when the output volt- age of the amplifier reaches clipping (maximum output volt- age). The threshold for the peak indicator automatically adjusts for load impedance and supply voltage variations.
Page 4
A PRODUCT OF: FENDER MUSICAL INSTRUMENTS CORP., TYPE: PR200 CORONA, CA 91720 CAUTION: CHASSIS SURFACE HOT WARNING: TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS EQUIPMENT TO RAIN OR MOISTURE ATTENTION: CAUTION: UTILISER UN TO REDUCE...
Page 5
BASIC CONNECTIONS and WIRING Power and audio signal cables are the most common sources of sound system failure. Well-made and carefully maintained cables are essential to the reliability of the entire system. If long speaker cables are required, make sure the wire is of sufficient size to transfer all of the avail- able amplifier power to the speakers rather than absorbing power itself.
Page 6
Fender amplifiers. Be sure to check the finish in an inconspicuous place to determine the suitability of any cleanser.
25 lbs. (11.3 kg) 3.5 in. (8.9 cm) 19 in. (48.3 cm) 15 in. (38 cm) A PRODUCT OF: FENDER MUSICAL INSTRUMENTS CORP. CORONA, CA 91720 USA THIS EQUIPMENT CONFORMS TO THE FOLLOWING DIRECTIVES : EMC 89/336/EEC AND LV 73/23/EEC...