Section 2: Power Supply - Grizzly T10687 Owner's Manual

Track saw

Hide thumbs Also See for T10687:

Table of Contents

SECTION 2: POWER SUPPLY

Availability

Electrocution,

equipment damage may

occur if machine is not

correctly grounded and

connected to the power

supply.

Full-Load Current Rating

Full-Load Current Rating at 120V ....... 9 Amps

Serious injury could occur if you connect

the machine to power before completing the

setup process. DO NOT connect to power

until instructed later in this manual.

120V Circuit Requirements

Voltage ........................................................ 120V

Cycle ..........................................................60 Hz

fire,

Phase ........................................... Single-Phase

Power Supply Circuit ......................... 15 Amps

For your own safety and protection of

property, consult an electrician if you are

unsure about wiring practices or electrical

codes in your area.

Note: The circuit requirements listed in this man-

ual apply to a dedicated circuit—where only one

machine will be running at a time. If this machine

will be connected to a shared circuit where mul-

tiple machines will be running at the same time,

consult a qualified electrician to ensure that the

circuit is properly sized for safe operation.

Table of Contents