Table of Contents
Advertisement
3.
Figure 19.
Note: The front and rear cutting indicator
arrows are only accurate when the blade is
fully extended. If the saw depth gauge is set,
the maximum cutting distance will be less.
4.
5.
Note: Holding the power trigger alone will not
activate the saw. For power to be activated,
both the plunge release and the power trig-
ger must be pressed. After power has been
activated, the plunge release can be disen-
gaged.
Figure 19
Let the saw reach full speed before contact-
ing the workpiece. Doing so will reduce the
risk of kickback, help provide the cleanest
cut, and reduce stress on the saw motor.
6.
Figure 20
Figure 20.
Advertisement
Table of Contents
