Removing Blades - Grizzly g8994z Owner's Manual

additional safety instructions for jig saws
1. read this manual: this manu-
al contains proper operating instruc-
tions for this machine.
2. safe WorK environment:
Clear the work area of all parts and
debris that may cause injury by fly-
ing objects.
3. securing WorKpiece: secure-
ly fix the workpiece in a vise or oth-
erwise clamp to avoid injury. do not
attempt to hold the workpiece by
hand.
4. overloading jig saW. do not
apply excessive pressure to the
tool while in use. if the speed drops
abnormally,
immediately.
5. tool inspection: run the tool
free of the workpiece before using to
ensure all parts are running smooth
and there are no abnormal sounds
or sparks. if any defect is found,
have the unit serviced.
6. removing
gloves to protect your hands when
removing the blade to avoid injury.
model g8994z (mfg 6/01+)
decrease pressure
blades:
Wear
no list of safety guidelines can be
complete. every shop environment
is different. always consider safety
first, as it applies to your individual
working conditions. use this and
other machinery with caution and
respect. failure to do so could result
in serious personal injury, damage to
equipment or poor work results.
7. checKing WorKsite: make
sure the workpiece is not supporting
another structure or that there are
no obstructions. Before cutting into
walls, check for wires, other electri-
cal hazards, or plumbing which may
be hidden in the wall space.
8. securing blade: make sure
the blade locking screw is secured
before operating the jig saw so the
blade does not loosen or fly out,
which could cause serious injury.
9. Keep blades sharp: do not
use dull or damaged blades. they
may break or cause the workpiece
to be expelled toward the opera-
tor at high speed, causing serious
injury. replace dull blades immedi-
ately.
10. trigger locK: make sure the
trigger lock is in the off position
before shutting the jig saw Off, or
before turning it ON.
-3
-