Grizzly g8994z Owner's Manual page 8

Blade locking
screw
Blade plunger
blade locking screw: secures the blade
in the jig saw.
blade plunger: holds the blade.
footplate: provides a stable, flat surface
for the jig saw to contact the workpiece.
Can be set at 90º or any angle between
45º and -45º side-to-side.
chip blower switch: adjusts the amount
of air flowing out of the front of the jig saw
for blowing chips out of way.
-6
-
controls
variable speed switch
figure 2. g8994z Controls.
stroke
the blade stroke rate, which can be set
between low (–) and high (+).
trigger lock: locks the trigger in the on
position so you can operate the jig saw
without holding the trigger down. Can be
turned off by pressing the trigger.
variable speed switch: adjusts the blade
speed. the more pressure you apply on
the switch, the faster the blade speed.
trigger lock
orbit selector
Chip Blower switch
footplate
rate adjustment:
model g8994z (mfg. 6/01+)
stroke rate
adjustment
Knob
Controls