Grizzly g8994z Owner's Manual page 11

the orbit selector switch is used to select
one of the four positions that determine the
orbital action of the blade. figure 7 shows
the recommended material for each setting
and the resulting orbital action.
each position is listed with recommended
material types for cutting.
position 0: hard materials such as
•
metals with strong cutting resistance,
and where a clean cut is desired. the
blade strokes up and down in this posi-
tion, eliminating all forward oscillation.
figure 7. orbital movement positions and typical materials for each.
model g8994z (mfg 6/01+)
orbital action
•
•
•
note: Changes in the orbital movement
can be made with the motor turned ON.
position i: soft materials.
position ii: moderate density materials
such as hard woods or plywood.
position iii: soft materials such as
plastics and softwoods.
-9
-