Physical Specifications - Fender BXR 300C Owner's Manual

SPECIFICATIONS
POWER AMPLIFIER SECTION:
Power output
Rated load impedance
Distortion at rated power
Damping factor, at 4 Ohms
Power bandwidth
Input sensitivity
Input impedance
Slew factor
Signal to noise ratio
DELTACOMP™ range
Input impedance:
Sensitivity: Volume at max., enhance
buttons out, all equalization
controls at 12 o'clock, power
amp at 300 Watts, 4 ohms
Equalization range:
Enhance:
Bass:
Treble:
Mid:
Overall signal to noise ratio, volume at min.,

PHYSICAL SPECIFICATIONS:

Width (rack ears installed)
Width (without rack ears)
Height
Depth
Weight
Width
Height
Depth
Weight
Speaker
FENDER MUSICAL INSTRUMENTS
1130 Columbia Street, Brea, California
300 Watts
4 Ohms
Less than .05%
Greater than 100
20 Hz - 20 kHz
1.33 volt R.M.S.
>10k Ohms
Greater than 1
-100 dB Re/300 Watts
PREAMP :
Input 1 > 100k Ohms
Input 2 > 800k Ohms
Input 1 < 10mV
Input 2 < 20mV
Low +9dB at 80 Hz.
High +12dB at 5kHz.
+/- 14dB at 40 Hz.
+/- 17dB at 5kHz.
+/- 20 dB at 150 Hz through 4kHz.
-95 dB below
rated output
BXR 300R
19 inches
17 inches
3.5 inches
10.125 inches
19 lbs.
BXR 300C
21-7/8 inches
29-11/16 inches
15-5/8 inches
78 lbs.
1 -15" Fender Special
Design (part number 027577)
A product of:
20 dB