Grandstream Networks GXP1400 User Manual page 50

Disable Conference
Enable MPK sending DTMF
Disable DND Button
Disable Transfer
Auto-Attended Transfer
In-call dial number on pressing
transfer key
Configuration via Keypad Menu
Enable STAR key Keypad
locking
Password to lock/unlock
Offhook timeout
China Telecom Mode
Do Not Escape # as %23 in
SIP URI
Disable Telnet
Display Language
FIRMWARE VERSION 1.0.4.23
SIP server is required to make quick IP call. The default setting is "No".
Disables the Conference function. The default setting is "No".
Enables Multi Purpose Key to send DTMF during the call. The default
setting is "No".
If set to "Yes", the DND button will not set the phone to DND. The default
setting is "No".
Disables the Transfer function. The default setting is "No".
If set to "Yes", the phone will use attended transfer by default. The
default setting is "No".
Configures the number for the phone to dial as DTMF during the call
using TRAN button.
Configures the access control for the users to configure from keypad
Menu. There are three different options:
•
Unrestricted. All the options can be accessed in keypad Menu.
•
Basic settings only. The CONFIG option will not display for users
to access in keypad Menu.
•
Constraint Mode.
NETWORK options will not display for users to access in keypad
menu.
If set to "Yes", the keypad can be locked by pressing and holding the
STAR * key for about 4 seconds. A lock icon will show indicating the
keypad is locked. The default setting is "Yes".
Note:
When the keypad is locked, users would need press and hold the STAR
* key for about 4 seconds again and then enter the password to unlock
it.
Configures the password to lock/unlock the keypad. The password field
allows number with up to 32 characters.
If configured, when the phone is on hook, it will go off hook after the
timeout (in seconds). The default value is 30 seconds.
Enables/Disables China Telecom Mode to use China Telecom special
features on the phone.
Specifies whether to replace # by %23 or not for some special situations.
The default setting is "No".
Disables Telnet access. The default setting is "No".
Selects display language on the phone.
GXP1400/GXP1405 USER MANUAL
CONFIG, FACTORY FUNCTIONS and
Page 50 of 60