Grandstream Networks GXP1400 User Manual page 41

FIRMWARE VERSION 1.0.4.23
UserID can be left blank.
•
Share Line
Share line for Shared Line Appearance feature. Select the Account
registered as Shared line for the line key. The Name and UserID can
be left blank.
•
Speed Dial
Select the Account to dial from. And enter the Speed Dial number in
UserID field to be dialed.
•
Speed Dial via active account
Similar to Speed Dial but it will dial based on the current active
account. For example, if the phone is offhook and account 2 is
active, it will call the configured Speed Dial number using account 2.
•
Dial DTMF
Enter a series of DTMF digits in the UserID field to be dialed during
the call. "Enable MPK Sending DTMF" (under Advanced Setting)
has to be set to "Yes" first.
•
VMsg
Select Account and enter the Voice Mail access number in the
UserID field.
•
Call Return
The last answered calls can be dialed out by using Call Return. The
Name and UserID field should be left blank. Also, this option is not
binding to the account and the call will be returned based on the
account with the last answered call.
•
Transfer
Select Account, and enter the number in the UserID field to be
transferred (blind transfer) during the call.
•
Call Park
Select Account, and enter the call park extension in the UserID field
to park/pick up the call.
•
Intercom
Select Account, and enter the extension number in the UserID field
to do the intercom.
•
LDAP Search
This option is to narrow the LDAP search scope. Enter the LDAP
search base in the Name field. It could be the same or different from
the Base in LDAP configuration under Advanced Settings. The Base
in LDAP configuration will be used if the Name field is left blank.
Enter the LDAP Name/Number filter in the UserID field.
GXP1400/GXP1405 USER MANUAL Page 41 of 60