Foxconn 760GXK8MB series User Manual page 24

S/PDIF Out Connector: SPDIF_OUT
The S/PDIF out connector is capable of pro-
viding digital audio to external speakers or
compressed AC3 data to an external Dolby
digital decoder.
Audio Interface: F_AUDIO
The audio interface provides two kinds of
audio output choices: the Front Audio, the
Rear Audio. Their priority is sequenced from
high to low (Front Audio to Rear Audio). If head-
phones are plugged into the front panel of
the chassis (using the Front Audio), then the
Line-out (Rear Audio) on the rear panel will
not work. If you do not want to use the Front
Audio, pin 5 and 6, pin 9 and 10 must be
short, and then the signal will be sent to the
rear audio port.
Speaker Connector: SPK
The speaker connector is used to connect
speaker of the chassis.
Additional COM Connector:COM2
This board provides an additional serial
COM connector for your computer. You
need connect the switching-cable to this
connector first, and then connect the serial
COM device with the port of the switching-
cable.
Chapter 2 Installation Instructions
1
SPDIF_OUT
1
MIC
MIC_PW R
AUD_OUT_R
NC
AUD_OUT_L
9
F_AU DIO
1
SPEAKER
RTS#
RI# GND
9
10
DSR#
EMPTY
CTS#
COM2
5V
Empty
DATA
GND
2
MIC_GND
+5VAC
AUT_RET_R
EMPTY
AUT_RET_L
10
SPK
Emypty
NC
SPKJ
TXD
DCD#
1
2
RXD
DTR#
19