Foxconn 760GXK8MB series User Manual page 21

Front Panel Connector: FP1
This motherboard includes one connector for
connecting the front panel switch and LED
indicator.
Hard Disk LED Connector (HD-LED)
The connector connects to the case's IDE indicator LED indicating the activity
status of hard disks.
Reset Switch (RESET-SW )
Attach the connector to the Reset switch on the front panel of the case; the
system will restart when the switch is pressed.
Power LED Connector (PW R-LED)
Attach the connector to the power LED on the front panel of the case. The Power
LED indicates the system's status. W hen the system is in S0 status, the LED is
on. When the system is in S1 status, the LED is blink. W hen the system is in S3,
S4, S5 status, the LED is off.
Power Swith Connector (PW R-SW)
Attach the connector to the power button on the front panel of the case. Pushing
this switch allows the system to be turned on and off rather than using the
power supply button.
IrDA Header: IR
The IrDA infrared transmission allows your com-
puter to send and receive data via an infrared
ray. The relevant parameters for the BIOS Inte-
grated Peripherals
should be set prior to using this function.
16
Chapter 2 Installation Instructions
+
HD-LED
-
RESET-SW
NC
FPFP1!
IRTX IRRX
GND
IR
1 2
+
PW R-LED
-
PWR-SW
9 10
+5V
1
Empty