Foxconn 760GXK8MB series User Manual page 15

Memory
This motherboard includes two 184-pin slots with 266/333/400 MHz Single
Channel DDR DRAM interface, You must install at least one memory module to
ensure normal operation. If you install two modules, they must be the same
sp eed . Mixin g m emory m odu les fro m d ifferen t m anuf act ures are n ot
recommended.
Installation of DDR Memory
1. There is only one gap in the center of the DIMM slot, and the memory
module can be fixed in one direction only.
2. Align the memory module to the DIMM slot, and insert the module
vertically into the DIMM slot.
3. The plastic clips at both sides of the DIMM slot will lock automatically.
Note:
Be sure to unplug the AC power supply before adding or re-
moving expansion cards or other system peripherals, espe-
cially the memory devices, otherwise your motherboard or the
system memory might be seriously damaged.
10
Chapter 2 Installation Instructions
104 Pins 80 Pins