Foxconn 865M01 series User Manual page 64

Chapter 3 BIOS Description
Super IO Device Menu
POWER ON Function (Default: BUTTON ONLY)
This option is used to set the power on method for your PC. Setting values
include: BUTTON ONLY, Password, Hot KEY, Mouse Left, Mouse Right, Any KEY
and Keyboard98.
KB Power ON Password (Default: Enter)
When the POWER ON Function is set to Password, use this item to set the
password.
Hot Key Power ON (Default: Ctrl-F1)
When the POWER ON Function is set to Hot-key, use this item to set the hot
key combination that turns on the system. The available setting values are:
Ctrl+F1-F12.
Onboard FDC Controller (Default: Enabled)
This option is used to set whether the Onboard FDC Controller is enabled.
The available setting values are: Disabled and Enabled.
Onboard Serial Port1/2 (Default: 3F8/IRQ4 / 2F8/IRQ3)
This option is used to assign the I/O address and interrupt request (IRQ) for the
onboard serial port 1/2.
Note: Do not try to set the same values for serial ports 1 and 2.
UART Mode Select (Default: Normal)
Use this option to select the UART mode. Setting values include Normal,
IrDA, and ASKIR. The setting value is determined by the infrared module in
stalled on the board.
RxD,TxD Active (Default: Hi,Lo)
This option is used to set the RxD and TxD parameters. It is recommended
to keep the default setting.
56
865M01G/PE/GV User Manual