Foxconn 865M01 series User Manual page 37

1394 Header: 1394 HDER (Optional)
The 1394 expansion cable can be connected to either the front (provided that
the front panel of your chassis is equipped with the appropriate interface) or
real panel of the chassis.
Wake-Up On LAN: WOL
Through the Wake-Up On LAN function, a wake event occurring from the net-
work can wake up the system. To utilize this function, please be sure an ATX 12V
power supply with a 5VSB line capable of delivering a current of at least 720mA,
and a LAN adapter which supports this function. Then connect the header to the
relevant connector on the LAN adapter, set "Wake up by PCI Card" to enabled in
the "POWER MANAGEMENT SETUP" section of the CMOS SETUP. Save and
exit, then boot the operating system once to make sure this function takes effect.
Chapter 2
865M01G/PE/GV User Manual
Installation Instructions
9
10
Empty
GND
VCC VCC
B -
B +
GND
GND
A - A +
1
2
1394 HDER
LAN wake up
GND
1
5V _SB_SYS
WOL
29