Foxconn 865M01 series User Manual page 41

Audio Interface: FP-AUDIO
The audio interface provides two kinds of audio output choices: the Front Audio,
the Rear Audio. Their priority is sequenced from high to low (Front Audio to Rear
Audio). If headphones are plugged into the front panel of the chassis (using the
Front Audio), then the Speaker Out (Rear Audio) on the rear panel will not work.
If you do not want to use the Front Audio, pin 5 and 6, pin9 and 10 must be short,
and then the signal will be sent to the rear audio port.
SPDIF/6CH_BRACKET
The SPDIF/6CH_BRACKET output is capable of providing digital or 6 channel
audio to external speakers, or compressed AC3 data to an external Dolby digital
decoder. The motherboard is equipped with one bracket.
Attention:
The empty pin of the SPDIF cable should be aligned to pin 9 on
the SPDIF/6CH_BRACKET.
Chapter 2
865M01G/PE/GV User Manual
Installation Instructions
1
2
Microphone AGND
MIC_VCC
A5V
R_OUT FR_OUT
NA
Empty
L_OUT FL_OUT
9 10
Front Audio
1 2
SL_OUT SR_OUT
LEFOUT
CEN_OUT
GND
N A
SPDIF_OUT VCC
SPDIF_IN
AGND
9
10
SPDIF CABLE
6CH_BRACKET
33