Load Fail-Safe Defaults; Load Optimized Defaults; Set Supervisor/User Password - Foxconn 755 series User Manual

Chapter 3 BIOS Description

Load Fail-Safe Defaults

Select this option to press Enter, it will pop out a dialogue box to allow you to
load default set by BIOS. Select <Y> and then press Enter to load default. Select
<N> and press Enter, it will not load. The defaults set by BIOS have set the basic
functions of system in order to ensure the stability of system. But if your com-
puter fails to properly run, you may load the default to make the system recover
normal, then carry out failure testing in next step. If you only want to load the
default in an option, you can select this option and press the key F6.

Load Optimized Defaults

Select this option and press Enter, it will pop out a dialogue box to let you load
the optimized defaults set by BIOS. Select <Y> and then press Enter to load the
optimized defaults. Select <N> and press Enter, it will not load. The defaults set
by BIOS have set the optimized performance parameters of system to improve
the performances of system components. But if the optimized performance
parameters to be set cannot be supported by your hardware devices, it will
cause system to make mistakes or not stable. If you only want to load the
optimized defaults in an option, you can select this option and press the key F7.

Set Supervisor/User Password

The preferential grade of supervisor password is higher than user password.
You can use supervisor password to start into system or enter into CMOS set-
ting program to amend setting. You can also use user password to start into
system, or enter into CMOS setting menu to check, but if you have set supervisor
password, you cannot amend setting.
When you select Set Supervisor / User Password, it will appear the following
message in the center of screen, which will help you to set password.
Enter Password:
Enter your password, not exceeding 8 characters, then press <Enter>, the pass-
word you have been enter now will replace the previous password. When the
system requires you to determine this password, you can enter this password
and press <Enter>.
If you do not need this setting, you can press <Enter> when the screen prompts
you to enter password, and the screen will appear the following message to
show this function invalid. In this case, you can freely enter into system and
CMOS setting program.
PASS WORD DISABLED!!!
Press any key to continue...
57
755/760A01 Series User Manual
57 2004-3-26, 15:28
755A01-032604.p65