Foxconn 755 series User Manual page 33

Audio Interface: F_AUDIO
The audio port includes two parts – the Front Audio and Rear Audio. Their priority
is sequenced from high to low (Front Audio to Rear Audio). If headphones are
plugged into the front panel of the chassis (using the Front Audio), then the Line
Out (Rear Audio) on the rear panel will not work. If you do not want to use the
Front Audio, pin 5 and 6, pin 9 and 10 must be short, and then the signal will be
sent to the rear audio port.
S/PDIF Out Connector: SPD_OUT
The S/PDIF out connector is capable of providing digital audio to external speak-
ers or compressed AC3 data to an external Dolby digital decoder.
755A01-032604.p65
Chapter 2 Installation Instructions
AUD_OUT_R
AUD_OUT_L
755/760A01 Series User Manual
25
1 2
MIC
MIC_GND
MIC_PWR +5VAC
AUT_RET_R
NA EMPTY
AUT_RET_L
9 10
F_AUDIO
4
GND
SPDIF-OUT
EMPTY
5V-SYS
1
SPD_OUT
2004-3-26, 15:28
25