Load Fail-Safe Defaults; Load Optimized Defaults; Set Supervisor/User Password - Foxconn 760GXK8MC Manual

Chapter 3 BIOS Description

Load Fail-Safe Defaults

Select this option to press <Enter>, it will pop out a dialogue box to allow you to
load default set by BIOS. Select <Y> and then press Enter to load default. Select
<N> and press <Enter>, it will not load. The defaults set by BIOS have set the
basic functions of system in order to ensure the stability of system. But if your
computer fails to properly run, you may load the default to make the system
recover normal, then carry out failure testing in next step. If you only want to load
the default in an option, you can select this option and press the key <F6>.

Load Optimized Defaults

Select this option and press Enter, it will pop out a dialogue box to let you load
the optimized defaults set by BIOS. Select <Y> and then press <Enter> to load
the optimized defaults. Select <N> and press <Enter>, it will not load. The de-
faults set by BIOS have set the optimized performance parameters of system to
improve the performances of system components. But if the optimized perfor-
mance parameters to be set cannot be supported by your hardware devices, it
will cause system to make mistakes or not stable. If you only want to load the
optimized defaults in an option, you can select this option and press the key
<F7>.

Set Supervisor/User Password

The preferential grade of supervisor password is higher than user password.
You can use supervisor password to start into system or enter into CMOS set-
ting program to amend the settings. You can also use user password to start
into system, or enter into CMOS setting menu to check, but if you have set
supervisor password, you cannot amend the settings.
When you select Set Supervisor / User Password, it will appear the following
message in the center of screen, which will help you to set password.
Enter Password:
Enter your password, not exceeding 8 characters, then press <Enter>, the pass-
word you have entered now will replace the previous password. When the sys-
tem requires you to determine this password, you can enter this password and
press <Enter>.
If you do not need this setting, you can press <Enter> when the screen prompts
you to enter password, and the screen will appear the following message to
show this function invalid. In this case, you can freely enter into system and
CMOS setting program.
PASSWORD DISABLED!!!
Press any key to continue...
42