Integrated Peripherals - Foxconn 755 series User Manual

Integrated Peripherals

SIS OnChip IDE Device
Press enter to set onchip IDE device. Please refer to page 46.
SIS OnChip PCI Device
Press enter to set onchip PCI device. Please refer to page 47.
Onboard SuperIO Device
Press enter to set onchip onboard SuperIO device. Please refer to page 48.
IDE HDD Block Mode (Default:Enabled)
This option is used to set whether the IDE HDD Block Mode is allowed. The
available setting values are: Disabled and Enabled.
Init Display First (Default:PCI Slot)
This option is used to set which display device will be used first when your
PC starts up. The available setting values are: PCI Slot and AGP.
USB0/1/2/2.0 Access Interface (Default:EDB Bus)
This option is used to set USB0/1/2/2.0 Access Interface. The available
setting values are: PCI Bus and EDB Bus.
Audio Access Interface (Default:EDB Bus)
This option is used to set audio access Interface. The available setting
values are: PCI Bus and EDB Bus.
755A01-032604.p65
Integrated Peripherals Menu
755/760A01 Series User Manual
45
Chapter 3 BIOS Description
2004-3-26, 15:28
45