Assembling The Optional Vacuum Splitter Hose - Festool CMS OF GE Supplemental User's Manual

Assembling the Optional Vacuum Splitter Hose

The optional vacuum splitter hose allows a single dust
extractor to be connected to both the fence's dust port and
the router's dust port. The components may come disas-
sembled and require assembly before use.
1. Slide the snap ring over the end of the hose.
2. Screw the threaded adapter onto the hose counterclock-
wise. They are left-hand threads, so it turns the opposite
of a typical screw.
3. Slide the end fitting over the threaded adapter.
Snap
Ring
Hose
4. Align the snap ring tabs with the slots in the end fitting,
and snap the two pieces together.
5. Repeat these steps for the second hose.
Tab
16
End
Fitting
Threaded
Adapter
Slot
6. Insert the two hoses into the Y-fitting. These are also
left-hand threads, so turn the hoses counterclockwise.
To use the hose, connect the Y-fitting into the dust extrac-
tor. The small hose connects to the dust port on the router,
and the large hose connects to the fence (or curved guard)
on the router table.
CMS OF Router Table