Ap4700>Admin(Network.wan.nat) - Extreme Networks Altitude 4700 Series Product Reference Manual

Network WAN NAT Commands
AP4700>admin(network.wan.nat)>
Displays the NAT submenu. The items available under this command are shown below.
show Displays the access point's current NAT parameters for the specified index.
set Defines the access point NAT settings.
add Adds NAT entries.
delete Deletes NAT entries.
list Lists NAT entries.
.. Goes to the parent menu.
/ Goes to the root menu.
save Saves the configuration to system flash.
quit Quits the CLI.
For an overview of the NAT configuration options available using the applet (GUI), see
"Configuring Network Address Translation (NAT) Settings" on page
Altitude 4700 Series Access Point Product Reference Guide
141.
331