Advertisement
Youwill need:
• Soft bristled brush
• Light household oil
• Warm, soapy water if using latex material
• Mineral spirits for oil based material
• Wrench
Peform the Pressure Relief
Procedure, page 7.
2.
Pull trigger guard to separate
from filter housing and
unscrew housing using a
wrench
3.
Remove filter from spray gun.
Clean
spray tip and filter with soft bristled
brush and appropriate cleaning
solution
0
4. Pour a few drops of light
household oil inside gun housing.
5. Install gun filter tapered-end first.
Reassemble
spray gun.
6. Install spray tip with arrow pointing
towards front of spray guard tip.
7. Install spray tip and guard
assembly.
19
Advertisement
