Replacing Oven Lights; Door Removal - Viking VGCC5364QSS Use & Care Manual

Replacing Oven Lights
Door Removal
ELECTRICAL SHOCK HAZARD
Disconnect the electric power at the main fuse or circuit
breaker before replacing bulb.
the bulb and handle with a soft cloth.
TO PREVENT
PERSONAL INJURY
Before removing the doors
make sure the pins are
properly installed in the hinges.
Failure to do so can result in
personal injury to hands
and!or fingers.
DO NOT touch bulb with bare hands. Clean off any signs of oil from
the bulb and handle with a soft cloth.
glass light
cover
1. Unsnap glass light cover access -
using a screwdriver in the
access groove.
2. Firmly 9rasp light bulb and gr°°ve '
pull ou_
3. Replace with halogen bulb
using volt and waEage
requirements listed on 91ass
cover.
4. Replace the light cover
by
snapping 91ass cover ontc
metal box.
5. Reconnect power at the main
fuse or circuit breaker.
]
Remove hin9e trim screws
and hinge trim.
Ooen door completely.
Place Din in sin hole.
Close unti] Dins stoD door
Lift door uo and ou_
50 51