Replacing Oven Lights - Viking 3 Series Use & Care Manual

Cleaning and Maintenance

Replacing Oven Lights

WARNING
ELECTRICAL SHOCK HAZARD
Disconnect the electric power at the main
fuse or circuit breaker before replacing
bulb.
DO NOT touch bulb with bare hands. Clean off any signs of oil from the bulb and handle with a soft cloth.
1. Unsnap glass light cover using a screwdriver in the
access groove.
2. Firmly grasp light bulb and pull out.
3. Replace with halogen bulb using volt and wattage
requirements listed on glass cover.
4. Replace the light cover by snapping glass cover onto
metal box.
5. Reconnect power at the main fuse or circuit breaker.
DO NOT touch bulb with bare hands. Clean off any
signs of oil from the bulb and handle with a soft
cloth.
access
groove
light
bulb
23
WARNING
glass light
cover