Blocking Channels; Unlocking Programs Temporarily; Using The Input Lock Feature - Toshiba 22AV60U Owner's Manual

Blockingchannels
With the Channels Block feature, you can block specific
channels. You wilt not be able to tune blocked channels unless
you unlock them.
To block channels:
1
Press M_uand highlight the Locksmenu icon•
2 Press T to display the PIN code entering screen•
3 Enter your four-digit PIN code and press @
(_' page 39)•
4 Press T to highlight
Channels
B lockand then press @
•A list of the channels available for that input will be
displayed along with the call letters for each channel, if
available•
5
New PiN Code
Press &V to highlight the channel you want to block
and press @, which puts an "×" in the box next to that
channel•
6 Repeat step 5 for other channels you want to block•
7 Highlight Done and press @.
To unblock individual channels:
In step 5 above, press &_' to highlight the channel you want
to unblock, press @ to remove the "X" from the box, highlight
Done and press @.
To block all channels at once:
Highlight Block All in step 5 on previous page and then
highlight Done and press @.
To unblock all locked channels at once:
Highlight AllOWAll in step 5 on previous page and then
highlight Done and press @.
Unlockingprograms temporarily
If you try to tune the TV to a program that exceeds the rating
limits you set, the TV will enter program lock mode and the
following message will appear on-screen:
You can either temporarily unlock the program or select an
unlocked program to watch•
To
1
2
temporarily unlock the program:
Press M_E.
Enter your four-digit PIN code and press @. If the correct
code is entered, the progran_ lock mode is released and
the normal picture appears• All locking is disabled until
the TV is turned off, and will be enabled when the TV is
turned on again•
Usingthe inputlock feature
You can use the Input Lock feature to lock the video inputs
(VIDEO1, VIDEO2, ColorStream HB-1,CoiorStrearn HB-2,
HDiVll 1 , HDMI 2 and PC) and channels 3 and 4. You will not be
able to view the input sources or channels until you unlock the
inputs•
To
1
lock/unlock the video inputs:
From the Locksmenu, Press T to display the PIN code
entering screen•
Enter your four-digit PIN code and press @.
3
Press T to highlight input Lockand press _.
4 Press & or V to select the level of video input locking
you prefer, as described below.
5
Video
Video+
Off
Press @.
Locks VIDEO 1, VIDEO 2,
CotorStrean_ HD1/HD2, HDMI 1,
HDMI 2, and PC.
Locks VIDEO 1, VIDEO 2,
ColorStream HD1/HD2, HDMI 1,
HDMI 2, PC and channels 3 and 4.
• Select Video+ if you play video
tapes via an ANT/CABLE input•
Unlocks all video inputs and channels
3 and 4.
41