Direct Pc Connection Through Crossover Network Cable; Network Connection Through Patch Cable - EverFocus PARAGON264x4--32CH Series Instruction Manual

1.11.1 Direct PC Connection through Crossover Network Cable

The point-to-point connection of DVR and PC requires a crossover (crossed) network cable. This type of
connection is ONLY used for direct connection to a single PC. Make sure that the PC is equipped with a
10/100Mbps compatible network connection.
Figure 1-3 Direct PC Connection
Pinout of crossover-cable

1.11.2 Network Connection through Patch Cable

The connection to an existing network requires a normal patch cable (straight-through). The illustration
shows the connection to a network switch or router.
Figure 1-4 Network Connection through Patch Cable
15